V2ray Mikrotik -

Introduction: Why Combine V2Ray with MikroTik? In the world of network administration, two powerhouses stand out for very different reasons. MikroTik (RouterOS) is the undisputed king of price-to-performance routing, firewalling, and bandwidth management. V2Ray , on the other hand, is the most sophisticated platform for circumventing internet censorship and building complex proxy chains (VMess, VLESS, Shadowsocks, Trojan).

"inbounds": [ "port": 1080, "protocol": "socks", "settings": "auth": "noauth", "udp": true ], "outbounds": [ "protocol": "vmess", "settings": "vnext": [ "address": "your-server.com", "port": 443, "users": [ "id": "UUID-HERE" ] ] , "streamSettings": "network": "ws", "security": "tls" ] v2ray mikrotik

/ip firewall mangle add chain=prerouting protocol=tcp dst-port=80,443 action=mark-routing new-routing-mark=via-socks /ip route add gateway=192.168.88.254 routing-mark=via-socks The native MikroTik Socks client is not as performant as a modern proxy. It lacks UDP support and can struggle with high concurrency. Use this only for low-bandwidth browsing. Part 4: Method 3 – The Professional Setup: Transparent Proxy Gateway (TPROXY + V2Ray) This is the gold standard for corporate or prosumer networks. You run V2Ray on a separate device (e.g., an old PC or NanoPi R4S) in TPROXY mode. MikroTik does Policy Based Routing (PBR) to this gateway. Why TPROXY? Unlike Socks or HTTP proxy, TPROXY preserves the original destination IP. This means CDNs, banking apps, and gaming traffic work flawlessly. Step 1: Configure V2Ray on the Gateway (Linux) On your gateway (IP: 192.168.88.10), run V2Ray with this inbound: Introduction: Why Combine V2Ray with MikroTik

By default, the container gets a virtual IP (e.g., 172.17.0.2). Use Mangle to send traffic there: V2Ray , on the other hand, is the

/ip socks set enabled=yes version=5 server=192.168.88.254:1080 /ip firewall nat add chain=srcnat action=masquerade /ip route add gateway=192.168.88.254