Pip Stf05501 Fixed Ladders And Cages Updated <EXTENDED>

| | Previous PIP STF05501 | Updated PIP STF05501 | |----------|----------------------------|---------------------------| | Cage details | Full sheets of fabrication details for steel cages. | Removed entirely. Replaced with note: "See PIP STF05502 for Ladder Safety Systems." | | Top exit/cage extension | Required 42-inch cage extension above landing. | Removed. Instead, requires a PFAS top bracket for ladder safety system. | | Rung spacing & clearance | 12-inch rung spacing (center-to-center). | Remains 12 inches, but added requirement for slip-resistant rungs (e.g., grit or serrated). | | Landing platforms | Minimum 18x24 inches. | Increased to 24x24 inches with 1,000 lb live load capacity. | | Fall protection type | Cages or ladder safety devices. | Only PFAS or Ladder Safety Systems. Cages forbidden. |

| | Cages Permitted? | Max Ladder Length Without PFAS | Retrofit Trigger | |--------------|----------------------|--------------------------------------|-----------------------| | OSHA 1910.28 | No (for new installs after 11/19/2018) | 24 ft | If ladder is replaced or substantially altered. | | ANSI A14.3 (2018) | No | 20 ft | Any modification > 20% of length. | | PIP STF05501 (updated) | No (explicitly removed) | 24 ft | If any single component (e.g., rung) is replaced. | | EN 353-1 (Europe) | N/A (cages banned since 2000s) | 10 ft (3 meters) | Immediately for all ladders over 10 ft. | pip stf05501 fixed ladders and cages updated

Published: [Current Date] Reading Time: ~8 minutes | | Previous PIP STF05501 | Updated PIP

"This only applies to new construction, not my existing refinery." Reality: It applies to existing ladders if you touch them. Replacing a single bent rung becomes a "modification," and the entire ladder must be evaluated per the updated standard. | Removed