Mot | 1654 Renault

A: Yes. DF054 is the same code in Renault’s older 4-digit systems. MOT 1654 is the CLIP tool’s display format.

This article breaks down what code 1654 means, which Renault engines it affects, the common symptoms, diagnostic steps, and permanent fixes. After cross-referencing Renault’s technical bulletins and owner forums, MOT 1654 typically refers to a Turbocharger Pressure Regulation Fault — more precisely, a deviation between the requested boost pressure and the actual measured boost pressure (often a positive deviation or overboost). mot 1654 renault

A: Almost never. ECU failure for boost control is exceptionally rare. If a mechanic skips vacuum diagnostics and blames the ECU, find a new mechanic. 9. Final Verdict & Cost Summary | Repair Approach | Success Rate | Typical Cost (Parts + Labor) | |----------------|--------------|------------------------------| | Vacuum hose replacement | 60% | $30 – $100 | | Vane cleaning (on-car) | 80% | $150 – $300 | | Solenoid + sensor replacement | 15% (when done alone) | $100 – $200 | | Turbo rebuild/replace | 95% but overkill | $800 – $1,500+ | A: Yes

A: You can reset with an OBD scanner, but the fault returns as soon as the ECU detects the boost deviation again – usually within 10–50 miles. This article breaks down what code 1654 means,

In plain English: The engine’s ECU (Engine Control Unit) commands a certain amount of boost from the turbocharger, but the sensors report that the system is producing too much pressure for too long.

A second mechanic found a cracked vacuum hose near the brake servo. The tiny leak (3mm split) was causing the turbo actuator to see only 0.3 bar instead of 0.8 bar. The ECU, seeing sluggish vane movement, logged overboost when the system finally caught up.

If you’ve plugged a diagnostic tool into a Renault (especially a Laguna, Mégane, Scénic, or Espace from the early 2000s) and seen the code — or the equivalent DF054 — you’re likely staring at a frustrating mix of electrical gremlins and mechanical uncertainty.