Iesp552avi001 Work Review

http://<IESP552_IP>:8080/work/iesp552avi001

lut_path: /etc/ies/luts/contrast_stretch_001.bin Assign highest real‑time priority: iesp552avi001 work

| Parameter | Description | Example Value | |-----------|-------------|----------------| | exposure_us | Camera exposure in microseconds | 5000 | | roi_x, roi_y, roi_w, roi_h | Region of interest for inspection | 100, 150, 640, 480 | | min_confidence | Pattern match threshold (0.0–1.0) | 0.85 | | output_gpio | Digital output pin for reject signal | 3 | Execute iesp552avi001 work manually via the CLI: | | E-3082 | High false reject rate

| Error Code | Symptom | Root Cause | Solution | |------------|---------|------------|----------| | E-1001 | Work fails to start | Missing camera handle | Run ies-cli detect-cameras and update work_config.yaml device path. | | E-2047 | Timeout during image capture | Trigger signal missing or too short | Check trigger sensor; ensure pulse width > 5 ms. Adjust trigger_debounce parameter. | | E-3082 | High false reject rate | ROI shift (vibration) | Recalibrate mechanical fixture or enable dynamic_roi_tracking . | | W-4401 | Work stops after 1 hour | License grace period expired | Purchase full iesp552avi001 runtime license or renew maintenance. | | E-5129 | Log write failure | SD card full | Archive old logs; set max_log_size_mb = 200 in config. | Enable verbose logging for iesp552avi001 work: | Enable verbose logging for iesp552avi001 work: ies-cli

ies-cli config iesp552avi001 work --trigger=edge_rising --trigger_pin=GPIO_7 ies-cli start iesp552avi001 work --daemon Real-time status is accessible via the embedded webserver (port 8080):

Example JSON status response: