"Better" often starts with the build. If the fsdss548 is a mechanical or electronic component, look for alternatives that utilize:

By moving to a "better" iteration of the fsdss548, users typically see:

To improve upon the fsdss548 specification, consider these upgrade paths: 1. Prioritize Material Quality

Fsdss548+better ✓

"Better" often starts with the build. If the fsdss548 is a mechanical or electronic component, look for alternatives that utilize:

By moving to a "better" iteration of the fsdss548, users typically see: fsdss548+better

To improve upon the fsdss548 specification, consider these upgrade paths: 1. Prioritize Material Quality "Better" often starts with the build

Product Description

Particle distribution by major, minor diameter, area, perimeter
Correlates to sieves
Real time particle size analysis
Excel data format available

Product Inquiry

You may also like…

SOLIDSIZER™ TS SOLID PARTICLE ANALYSIS SYSTEM

10 um – 2,400 um Particle size analysis range. This system is designed for lab use to determine color speck detection, particle size, shape and distribution for flat or needle shape particles.

Relevant ASTM standards:
D8200 Creating a Correlation to Compare Particle Size Distribution Results of Proppants by Dynamic Imaging Analyzers and Sieves.

D8392 Calibration and Verification of Direct Imaging Analyzers Used for Particle Size and Shape Analysis of Catalytic Materials.

MORE INFO
LAB – SOLIDSIZER

The CANTY SolidSizer™ is a vision-based sensor used with the CANTY Vector System image processor for dry particle size measurement in a laboratory environment. The CantyVision™ Software accurately measures multiple aspects of the particles from area / perimeter / minor and major axis / etc. In comparison to a sieve which measures only minor axis the CantyVision™ software can correlate directly to a sieve so the customer does not have to change any QC documents. The SolidSizer™ can correlate within 2% of a sieve. A typical sieve analysis takes anywhere from 20-30 minutes including cleaning and setup for a 70-100 gram sample. On the SolidSizer™ that same sample takes less than 2 minutes. Also multiple screen distributions can be setup to accommodate multiple customers or areas in the process, hence eliminating the need for multiple runs on the same sand for different size distributions. After correlating to current methods of minor axis, customers find benefit in comparing minor axis to major axis and comparing shape factors. Reduce lab time and make sure production samples are not skipped over due to lack of sample time available!

MORE INFO
3D ROCKSIZER™ PARTICLE ANALYSIS SYSTEM

500 um – 6,000 um Particle size analysis range. This system is designed for lab & on-line use to determine particle size, shape and distribution, thereby eliminating the need for sieve analysis.

MORE INFO
INDUSTRIAL SOLIDSIZER™ PARTICLE ANALYSIS SYSTEM

50 um – 2,400 um Particle size analysis range. This system is designed for on-line use to determine particle size, shape and distribution, thereby eliminating the need for sieve analysis.

Related ASTM Standards:
• D8200 – Standard Practice for Creating a Correlation to Compare Particle Size Distribution Results of Proppants by Dynamic Imaging Analysis and Sieves. (D18.26)
• D8392 – Standard Practice for Calibration and Verification of Direct Imaging Analyzers Used for Particle Size and Shape Analysis of Catalytic Materials (D32.02)
• E2589 – Terminology Relating to Non-Sieving Methods of Powder Characterization. (E29.02)

Related ISO Standards:
• 9276-6 Representation of results of particle size analysis – Part 6: Descriptive and quantitative representation of particle shape and morphology.

Canty participates in the referenced ASTM subcommittees (D18.26, D32.02 and E29.02) in order to develop useful standards for imaging analyzers. Although the referenced standards are often particular to a type of particle, they can be generalized for use with many types of particles.
ISO9276-6 is widely used to describe shape parameters and provide corresponding formulae for calculation of values.

MORE INFO
SOLIDSIZER™ WITH COLOR ANALYSIS

10 um – 2,400 um Particle size analysis range. Finished sugar product is subjected to a series of quality control tests in order to determine if the sugar crystals are the correct size and shape, and also that the concentration of black specks / burned sugar crystals is within specification. CANTY’S range of image based particle analysis systems provide true size and shape characterization, with each particle measured under 13 size and shape parameters. CANTY’S imaging systems also offer the option of Black Speck detection within the sugar sample. The systems can be run at line through the use of a sweep sampler, or offline as laboratory instruments. This system provides direct correlation to traditional sieve analysis, but does so in a much shorter analysis time, with much less operator input required.

MORE INFO

TOP

SIGN IN YOUR ACCOUNT TO HAVE ACCESS TO DIFFERENT FEATURES

FORGOT YOUR DETAILS?

Fsdss548+better ✓

Product Description

Product Inquiry

You may also like…

SOLIDSIZER™ TS SOLID PARTICLE ANALYSIS SYSTEM

LAB – SOLIDSIZER

3D ROCKSIZER™ PARTICLE ANALYSIS SYSTEM

INDUSTRIAL SOLIDSIZER™ PARTICLE ANALYSIS SYSTEM

SOLIDSIZER™ WITH COLOR ANALYSIS

Related products

MICROFLOW PARTICLE SIZING SYSTEM

WATER IN OIL – INFLOW

INFLOW™ PARTICLE SIZING SYSTEM

PORTABLE INFLOW OIL IN WATER/WATER IN OIL ANALYZER