Ext-remover Ltbeef -

Allow the product to sit for 10 to 20 minutes. Do not let it dry completely. If it begins to flake, mist lightly with water.

Remove loose debris with a brush or compressed air. The surface does not need to be warm; the "LT" technology handles temperatures down to 35°F (1.5°C). ext-remover ltbeef

For heavily baked-on carbon deposits, scrub with a medium-bristle nylon brush. Do not use steel wool, as this may embed metal particles. Allow the product to sit for 10 to 20 minutes

Rinse with cold or lukewarm water (max 40°C) at moderate pressure (1,000 to 1,500 PSI). The emulsified residue will turn milky white as it washes away. Remove loose debris with a brush or compressed air

Using a low-pressure sprayer or a notched trowel (for heavy build-up), apply a 3mm thick layer of Ext-Remover LTBeef directly onto the residue. For vertical surfaces, the "Beef" viscosity prevents run-off.