Technical Questions
everec 340 user manual Crystal Reports Forum : Crystal Reports 9 through 2022 : Technical Questions
Message Icon Topic: 32 to 64 bits Post Reply Post New Topic
Author Message
Francesc
Newbie
Newbie


Joined: 08 Jul 2010
Location: Spain
Online Status: Offline
Posts: 7
Quote Francesc Replybullet Topic: 32 to 64 bits
    Posted: 12 Nov 2012 at 6:00am

Everec 340 User Manual [ORIGINAL × 2025]

A: Either remove the SD card and use a Lightning-to-SD adapter, or connect the camera to Wi-Fi (Everec 340 does NOT have built-in Wi-Fi; you need the “340W” version).

A: Yes. The camera is designed to boot with ignition power. If it restarts twice , your car’s 12V socket may dip below 10V during cranking. Install a “delay timer” or hardwire with a voltage stabilizer. everec 340 user manual

If you’ve recently purchased an Everec 340 —whether it’s a dash cam, a navigation device, or a specialized automotive tool (depending on the specific product line)—you know that having the original Everec 340 user manual on hand is essential. However, physical manuals get lost, and PDFs can be hard to find. A: Either remove the SD card and use

A: On the underside of the swivel mount, behind the lens. You need to rotate the lens 90° upward to see the tiny white sticker. Conclusion: Keep Your Everec 340 Running for Years The Everec 340 user manual is more than a piece of paper—it is your roadmap to reliable footage, legal protection, and avoiding costly replacements. While this guide covers 90% of what you need, always verify voltage ratings, fuse types (for hardwiring), and local dash cam laws (e.g., audio recording consent) in the original document. If it restarts twice , your car’s 12V

A: With firmware v2.0 or newer, yes—but you must format it to FAT32 (use GUIformat tool). The manual is outdated for larger cards.

IP IP Logged
hilfy
Admin Group
Admin Group
Avatar

Joined: 20 Nov 2006
Online Status: Offline
Posts: 3702
Quote hilfy Replybullet Posted: 12 Nov 2012 at 11:00am
1.  Crystal will only work with 32-bit database drivers - it cannot connect using 64-bit drivers.
 
2.  You would need the 64-bit Crystal Runtime modules.  I'm not sure whether they're available for VS2008, but I know they're available as part of the "Crystal Reports for Visual Studio 2010" download that works with VS 2010.
 
-Dell
IP IP Logged
Francesc
Newbie
Newbie


Joined: 08 Jul 2010
Location: Spain
Online Status: Offline
Posts: 7
Quote Francesc Replybullet Posted: 12 Nov 2012 at 9:20pm
Dell,
 
I have installed CRRedist2008_x64 "Crystal Reports Basic Runtime fom Visual Studio 2008 (x64)".
 
But I don't know how applicattions can run this runtime. If I set target to "x64" or "Any CPU" it doesn't work.
 
Maybe ...
using CrystalDecisions.CrystalReports.Engine;
... has to be changed to another reference??
 
Thank you
 
[Edit] I found this... Is it valid today? http://scn.sap.com/docs/DOC-21528


Edited by Francesc - 12 Nov 2012 at 9:49pm
IP IP Logged
hilfy
Admin Group
Admin Group
Avatar

Joined: 20 Nov 2006
Online Status: Offline
Posts: 3702
Quote hilfy Replybullet Posted: 13 Nov 2012 at 3:26am
For the link - there are newer updates of the software it mentions as well as completely new versions of Crystal - Crystal 2011 and Crystal for VS 2010 - so it's partially still valid, but not completely.
 
-Dell
IP IP Logged
Francesc
Newbie
Newbie


Joined: 08 Jul 2010
Location: Spain
Online Status: Offline
Posts: 7
Quote Francesc Replybullet Posted: 13 Nov 2012 at 9:39pm
I finally set target to "x86" in WinForms applications.

I must find out what to do with web application when we change server to x64. We can not update the project to VS2010 because it is a very large VS2008 solution.

Thank you

Francesc


Edited by Francesc - 13 Nov 2012 at 9:40pm
IP IP Logged
Post Reply Post New Topic
Printable version Printable version

Forum Jump
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum



This page was generated in 0.031 seconds.