A: This indicates sensor damage or overload history. Check that the pan is seated properly. If the issue persists, the load cell is likely bent – contact Digi support.
OFF → Hold CAL → Place required weight → Wait for PASS.
A: Yes, using the tare function. Place an empty cup on the scale, press TARE, then pour liquid. Do not spill liquid onto the scale body.
A: The internal processor requires three consecutive identical readings within the tolerance band before displaying “STABLE”. Lightly touching the table will cause the indicator to turn off.
Container on pan → TARE → Add contents.
A: This indicates sensor damage or overload history. Check that the pan is seated properly. If the issue persists, the load cell is likely bent – contact Digi support.
OFF → Hold CAL → Place required weight → Wait for PASS. digi sm-500 scale user manual
A: Yes, using the tare function. Place an empty cup on the scale, press TARE, then pour liquid. Do not spill liquid onto the scale body. A: This indicates sensor damage or overload history
A: The internal processor requires three consecutive identical readings within the tolerance band before displaying “STABLE”. Lightly touching the table will cause the indicator to turn off. digi sm-500 scale user manual
Container on pan → TARE → Add contents.