C800universalk9mzspa1593m10bin: Install

Flash the C800 Universalk9mzspa1593m10bin image to the router's flash memory:

Configure the router to use the new software image. You can do this by reloading the router and entering the setup command:

Enter ROMMON (ROM Monitor) mode by rebooting the router and pressing the Ctrl+Break key sequence during the boot process. Alternatively, you can enter ROMMON mode using the reload command. c800universalk9mzspa1593m10bin install

rommon 1> ip 192.168.1.100 255.255.255.0 Replace 192.168.1.100 with the IP address of your TFTP server.

Download the C800 Universalk9mzspa1593m10bin image from the TFTP server using the tftp command: flash C800 Universalk9mzspa1593m10bin

Router> reload Router> setup Follow the setup wizard to configure the router.

Verify the integrity of the image by checking its MD5 checksum: c800universalk9mzspa1593m10bin install

rommon 4> flash C800 Universalk9mzspa1593m10bin