A: Yes. The BX60’s power transistors generate heat when delivering 6 amps. The internal fan should activate. If no fan runs and the unit smells like hot plastic, unplug immediately and contact Bradex support. Conclusion: Trust the Process, Trust the Bradex BX60 The difference between a cheap charger and a high-quality one like the Bradex BX60 is not just the price tag—it’s the intelligence, safety, and durability built into every circuit. However, even the best machine requires an operator who understands the high-quality instructions .
A: This mode applies a controlled high voltage (15.5V) at a very low current for 1-4 hours. It can break down sulfate crystals on old batteries. Warning: Do not use on AGM, Gel, or sealed batteries. Only use on serviceable flooded batteries with water caps. bradex bx60 battery charger instructions high quality
A: The charger measures voltage, not cranking amps (CCA). Your battery may have a dead cell. A fully charged 12V battery should read 12.6V or higher. If it reads 12.6V but fails a load test, the battery is faulty. A: Yes
| Battery Type | Voltage | Recommended BX60 Mode | Why? | | :--- | :--- | :--- | :--- | | Standard Flooded (Wet Cell) | 12V | (or 14.4V) | Needs a higher absorption voltage. | | AGM (Absorbent Glass Mat) | 12V | AGM/ Cold (or 14.7V) | Requires a slightly higher voltage to fully saturate. | | Gel Cell | 12V | GEL (or 14.1V) | Sensitive to overvoltage; lower voltage prevents drying out. | | Lithium (LiFePO4) | 12V | Lithium (if equipped) | Uses a completely different charge curve. | If no fan runs and the unit smells