Over months or years, these pads fill up with ink. Epson engineers designed a counter to track this. Once the counter reaches a preset limit (e.g., 15,000 cleaning cycles), the printer . This is NOT because the pad is dangerously full, but because the counter has hit its ceiling.
A: No. The reset function only changes a number in EEPROM. But avoid running unnecessary “head cleaning” loops via the program.
A: No. Generic tools (like for R230 or L800) will brick your PX660. Use only PX660/XP-330 specific version. Conclusion: Is the Epson PX660 Adjustment Program Worth It? Absolutely. Without it, your fully functional printer becomes a paperweight the moment a software counter hits 100%. With it, you can extend the life of your PX660 by years – saving money, time, and preventing e-waste. adjustment program epson px660
A: Theoretically unlimited. But after 3-4 resets, the pads will physically overflow. You must then open the printer and replace the pads.
From an environmental perspective, resetting your printer is – it reduces e-waste. Just be responsible with potential ink leaks. Frequently Asked Questions (FAQ) Q: Will this work on macOS? A: No. Use Windows (physical or virtual machine like VirtualBox). Over months or years, these pads fill up with ink
A: Newer firmware sometimes blocks 3rd-party utilities. If so, try downgrading firmware (risky) or use the paid WIC Reset utility.
The most trusted source for the community is , printresetter.com , or the Epson service center forum . Look for version Epson Adjustment Program v1.0.0 or newer. This is NOT because the pad is dangerously
Replace the pads (a messy, complicated teardown) or buy a new printer.
Over months or years, these pads fill up with ink. Epson engineers designed a counter to track this. Once the counter reaches a preset limit (e.g., 15,000 cleaning cycles), the printer . This is NOT because the pad is dangerously full, but because the counter has hit its ceiling.
A: No. The reset function only changes a number in EEPROM. But avoid running unnecessary “head cleaning” loops via the program.
A: No. Generic tools (like for R230 or L800) will brick your PX660. Use only PX660/XP-330 specific version. Conclusion: Is the Epson PX660 Adjustment Program Worth It? Absolutely. Without it, your fully functional printer becomes a paperweight the moment a software counter hits 100%. With it, you can extend the life of your PX660 by years – saving money, time, and preventing e-waste.
A: Theoretically unlimited. But after 3-4 resets, the pads will physically overflow. You must then open the printer and replace the pads.
From an environmental perspective, resetting your printer is – it reduces e-waste. Just be responsible with potential ink leaks. Frequently Asked Questions (FAQ) Q: Will this work on macOS? A: No. Use Windows (physical or virtual machine like VirtualBox).
A: Newer firmware sometimes blocks 3rd-party utilities. If so, try downgrading firmware (risky) or use the paid WIC Reset utility.
The most trusted source for the community is , printresetter.com , or the Epson service center forum . Look for version Epson Adjustment Program v1.0.0 or newer.
Replace the pads (a messy, complicated teardown) or buy a new printer.